Aerial Platform Safety

Safety Posters Library

Aerial lifts are vehicle-mounted, boom-supported aerial platforms, such as cherry pickers or bucket trucks, used to access utility lines and other above ground job sites. The major causes of fatalities are falls, electrocutions, and collapses or tip overs. Employers must take measures to ensure the safe use of aerial lifts.

Pre-start Inspection
Always follow maintenance schedule recommended by the manufacturer.  Before each use, check that both the vehicle and lift components work properly.  Check fluid levels, wheels, tires, battery, horn, gauges, backup alarms, steering, brakes, etc.  

Check Work Area
Assess the best way to reach the work area.  Identify the hazards present and take the corrective actions to eliminate hazards.  Do not place lifts directly underneath a hazard if possible. Ensure proper clearance from sprinkler heads and other overhead hazards such as electrical wiring.  Avoid contact with utility or power lines.  Keep a 10’ clearance distance from all power lines to avoid potential for an arc.   

Fall Prevention
When in the lift, secure all gates and openings.  Never overreach outside the lift.  Stand firmly on the floor of the bucket when working.   Do not stand on the railings to perform work.  When in a bucket truck or boom lift, use a body harness with a lanyard attached to the boom or the bucket.  Harness should fit properly and not worn loosely on the body.  The D ring should be worn between the shoulder blades.  Do not tie off on the guardrail.  Tie off only to the point as designated by the manufacturer inside the lift. Harnesses are to prevent one from stepping outside of the bucket, not as fall protection. 

Operation
Before each use of the lift, position it on a stable level surface.  If the outriggers are to be used, set the brakes to the vehicle and park it on a level surface.

Use the equipment in compliance with the recommendations of the manufacturer.  Never exceed the weight capacity.  Calculate load by factoring in the weight of the workers, tools, and materials. An aerial lift is not to be used as a crane or a forklift.  Do not load objects that are larger than the lift.  When one needs to mobilize the lift, if possible lower the platform and then move the lift to the desired work area.  If moving with the platform in the air, mobilize the lift at a slow and safe speed.  Check for people and other tools or materials that may impede the path of travel.

Make sure weather conditions are suitable.  Do not operate in high winds.  Doing so will increase the likelihood of the lift tipping over.    

Tools
Account for tools at all times.  If possible, tether tools to help reduce the risk of tools falling on workers below the lift.  If tools are not in use, secure them.  

Traffic
Use signage to guide traffic away from the location of the lift.  Avoid walking under a lift. Ensure back up alarms are functional to alert others of your movement.  

Ask a Safety Consultant

Sources:
https://www.osha.gov/Publications/aerial-lifts-factsheet.html

OSHA Standards: 
Review the following standards and apply as corresponds to your specific industry.
29 CFR 1910.67, 29 CFR 1910.269, 29 CFR 1926.21, 29 CFR 1926.453, 29 CFR 1926.502

This company was issued a secure rating by the A.M. Best Company, click for additional details

Insurance coverage in all states other than Utah is provided by Advantage Workers Compensation Insurance Company, a wholly-owned subsidiary of WCF Mutual Insurance Company, doing business as WCF Insurance. Advantage is domiciled in Indiana; NAIC number: 40517. Administrative office: P.O. Box 571918, Salt Lake City, UT 84157-1918.
Due to scheduled maintenance, the website may be unavailable daily from 9:00 p.m. - 1:00 a.m. MST Privacy Statement | 800.446.2667
Copyright 2017 WCF Insurance. All Rights Reserved